Böcker i River Publishers Series in Communications-serien

The subject is "e;Virtual Roaming for data services"e; and "e;Seamless Technology change"e; also called "e;Number Continuity"e;."e;Virtual Roaming for voice and SMS"e; was covered in one of the author's previous book. "e;Virtual Roaming"e; means that it allows a subscriber to visit a network which his home network does not have an agreement with. The "e;Seamless Technology change"e; allows a user to keep all his services including reception of calls and SMS sent to his usual number when he switches his GSM to a Satellite phone or to WiFi. The implementation of Seamless Technology change uses the SS7 Roaming Hub and GTP Hubs technology explained in the first part of the book. The book also contains chapters explaining in detail the steering and anti-steering of roaming, LTE Serving Mobile Location Centers, and Advanced Policy and Charging implementations in LTE and 3G. This is to be used as an easy reference book. All the relevant references to the standards are included chapter by chapter. This is the first book on the two main subjects of Virtual Data Roaming and Seamless Technology change. Keywords:Virtual Roaming, Number Continuity, Seamless technology change, Policy Charging and Control, LTE LBS, Steering of Roaming, GTP Hub, MMS Hub,RADIUS Hub, DIAMETER Hub

In recent years, a considerable amount of effort has been devoted, both in industry and academia, towards the design, performance analysis and evaluation of modulation schemes to be used in wireless and optical networks, towards the development of the next and future generations of mobile cellular communication systems. Modulation Theory is intended to serve as a complementary textbook for courses dealing with Modulation Theory or Communication Systems, but also as a professional book, for engineers who need to update their knowledge in the communications area. The modulation aspects presented in the book use modern concepts of stochastic processes, such as autocorrelation and power spectrum density, which are novel for undergraduate texts or professional books, and provides a general approach for the theory, with real life results, applied to professional design. This text is suitable for the undergraduate as well as the initial graduate levels of Electrical Engineering courses, and is useful for the professional who wants to review or get acquainted with the a modern exposition of the modulation theory. The books covers signal representations for most known waveforms, Fourier analysis, and presents an introduction to Fourier transform and signal spectrum, including the concepts of convolution, autocorrelation and power spectral density, for deterministic signals. It introduces the concepts of probability, random variables and stochastic processes, including autocorrelation, cross-correlation, power spectral and cross-spectral densities, for random signals, and their applications to the analysis of linear systems. This chapter also includes the response of specific non-linear systems, such as power amplifiers. The book presents amplitude modulation with random signals, including analog and digital signals, and discusses performance evaluation methods, presents quadrature amplitude modulation using random signals. Several modulation schemes are discussed, including SSB, QAM, ISB, C-QUAM, QPSK and MSK. Their autocorrelation and power spectrum densities are computed. A thorough discussion on angle modulation with random modulating signals, along with frequency and phase modulation, and orthogonal frequency division multiplexing is provided. Their power spectrum densities are computed using the Wiener-Khintchin theorem.

Provides an introduction to the fundamental principles of communication. Basic mathematical background for system and signals, analogue communication systems and modern digital communication systems are systematically introduced. Theory is been explained in an easy-to-understand way. Advanced topics in modern digital communications are conceptually explained.

Presents state-of-the-art results in services and service architectures, identifies challenges including business models, technology issues, service management, and security, and describes important trends and directions. The book provides readers with a comprehensive reference for the most current developments in the field.

The desire for precise knowledge about the location of a moving object at any time instant has motivated a great deal of scientific research recently. This is owing to a steady expansion of the range of enabling devices and technologies, as well as the need for seamless solutions for location-based services. Besides localization accuracy, a common requirement for emerging solutions is that they are cost-abstemious, both in terms of the financial and computational cost. Hence, development of localization strategies from already deployed technologies, e.g., from different terrestrial radio frequency sources is of great practical interest. Amongst other, these include localization strategies based on received signal strength (RSS), time of arrival, angle of arrival (AoA) or a combination of them. RSS-AoA-based Target Localization and Tracking in Wireless Sensor Networks presents recent advances in developing algorithms for target localization and tracking, reflecting the state-of-the-art algorithms and research achievements in target localization and tracking based on hybrid (RSS-AoA) measurements.Technical topics discussed in the book include:Centralized RSS-AoA-based Target LocalizationDistributed RSS-AoA-based Target LocalizationRSS-AoA-based Target Tracking via Maximum A Posteriori EstimatorRSS-AoA-based Target Tracking via Kalman FilterRSS-AoA-based via Sensor NavigationThis book is of interest for personnel in telecommunications and surveillance industries, military, smart systems, as well as academic staff and postgraduate/research students in telecommunications, signal processing, and non-smooth and convex optimization.

Sustainable development is development that meets the needs of the present without compromising the ability of future generations to meet their own needs. Green Energy is widely considered a sustainable energy which meets the needs of the present without compromising the ability of future generation to meet their own needs.

Offers an introduction to cellular network planning, covering conventional and contemporary wireless systems. Spectral allocation and the frequency plan are discussed, along with the essential characteristics of wireless systems. The book presents a review of existing models, considering both green field dimensioning and network expansion strategies.

Addresses the issue of cybersecurity and privacy. Technical topics discussed include cybersecurity; encryption; privacy policy; trust; security and the Internet of Things; Botnets; data risks; cloudbased services; and visualization.

In 2007 an international symposium discussed the effective convergence between the available and perspected technologies for the civil and military worlds as well as the conceivement of applications that can take the maximum benefit from the dual approach, optimizing the available economic resources. This book summarises the material from this symposium.

Broadband communication has become the major focus for industry for offering rich multimedia IP services in next generation networks. This book deals with the state-of-the-art and the underlying principles of key technologies which facilitate broadband telecommunications, illustrating the use of these technologies.

Major advances have been reported in Brain-Computer Interface / Brain-Machine Interface (BCI/BMI) applied to rehabilitation. This subject received much attention within the Society on Communication, Navigation, Sensing and Services (CONASENSE). Describing the state of the art on various BCI/BMI activities related to neuro-rehabilitation is the central theme of this book.

Provides insights in to the process of identifying user requirements by describing varying case studies in which technologies or software has been developed. A variety of user requirements are provided illustrating the effect of changing the targeted user group with respect to age, to the context and the different technologies or software.

Provides a clear insight into the basics of compressed sensing; a thorough exploration of applying CS to audio, image and computer vision; different dimensions of applying CS in Cognitive radio networks; CS in wireless sensor network for spatial compression and projection; and efficient methods to sample and reconstruct the images in resource constrained WMSN environment.

Provides a broad overview of the Internet of Things (IoT), ranging from research, innovation and development priorities to enabling technologies, nanoelectronics, cyber-physical systems, architecture, interoperability and industrial applications. The book presents global views and state of the art results on the challenges facing the research, innovation, development and deployment of IoT.

Provides a broad overview of various topics related to the Internet of Things, from research, innovation and development priorities to enabling technologies, nanoelectronics, cyber physical systems, architecture, interoperability and industrial applications. The book presents global views and state of the art results on the challenges facing the research, development and deployment of IoT.

Provides a concise description of basic electronic components and apparatus and how to work with them practically. Theoretical description is followed by specifying the practical considerations so as to cement the student's understanding of the component/apparatus. This volume contains a detailed component description with focus on real life usability.

Data communication standards are comprised of two components: The "e;protocol"e; and "e;Signal/data/port specifications for the devices involved"e;. The protocol describes the format of the message and the meaning of each part of the message. To connect any device to the bus, an external device must be used as an interface which will put the message in a form which fulfills all the electrical specifications of the port. These specifications are called the "e;Standard"e;. The most famous such serial communication standard is the RS-232.In IT technology, Communication can be serial or parallel. Serial communication is used for transmitting data over long distances. It is much cheaper to run the single core cable needed for serial communication over a long distance than the multicore cables that would be needed for parallel communication. It is the same in wireless communication: Serial communication needs one channel while parallel needs multichannel. Serial Communication can also be classified in many other ways, for example synchronous and asynchronous; it can also be classified as simplex, duplex and half duplex.Because of the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. These have been developed over recent decades and range from the simple to the highly complicated. This large number of protocols was necessary to guarantee the optimum performance for the targeted applications. It is important for communication engineers to have enough knowledge to match the right protocol and standard with the right application. The main aim of this book is to provide the reader with that knowledgeThe book also provides the reader with detailed information about:- Serial Communication- Universal Asynchronous Receiver Transmitter (UART)- Universal Synchronous/Asynchronous Receiver Transmitter (USART - Serial Peripheral Interface (SPI) - eSPI- Universal Serial Bus (USB)- Wi-Fi- WiMax- InsteonThe details of each technology including specification, operation, security related matters, and many other topics are covered.The book allocates three chapters to the main communication standards. These chapters cover everything related to the most famous standard RS-232 and all its variants. Other protocols such as: I2C, CAN, ZigBee, Z-Wave, Bluetooth, and others, are the subject of the authors separate book "e;Microcontroller and Smart Home Networks"e;.

Covers CONASENSE Architecture; Performance Analyses of Integrated Communication Systems; Cognitive Radio Networks; Brain Computer Interfacing; Quality Improvement of Generic Services; Machine to Machine Communications; and Chip to Chip Communications.

Examines what privacy is and some of the technologies that may help us to regain some privacy. The book discusses what privacy is about, what the different aspects of privacy may be and why privacy needs to be there by default. Technologies that are specifically designed to help us regain some digital privacy are discussed.

The Indian Institute of Information Technology has organised international and national seminars since 2008 to deliberate on the application of information communication technologies [ICT] in the rehabilitation of people with disabilities. This book is a collection of 20 articles based on the presentations made in the seminars.

Offers a compendium of emerging smart techniques using artificial intelligence for diagnosis, bio-informatics data analysis and biomedical systems. This book details innovative applications of neural networks, computer vision, panoramic image processing, electroencephalography, electromyography and specialized information delivery based on smart sensors.

Relay systems have become a subject of intensive research interest over the recent years, as it is recognized that they can improve performances and extend the coverage area of wireless communication systems. Special attention has been dedicated to them since the proposal appeared for their implementation in mobile cellular systems. Numerous researches conducted after that proposal have enabled incorporation of OFDM based relay systems in both accepted standards for IMT-Advanced systems. Nowadays, researches are ongoing with the aim to define new solutions for performance improvement of the standardized OFDM relay systems for cellular networks and one of the interesting solutions is implementation of subcarrier permutation (SCP) at the relay (R) station. The book "e;OFDM based relay systems for future wireless communications"e; presents a comprehensive research results in analyzing behavior and performance of the OFDM based relay systems with SCP. Dual-hop relay scenario with three communication terminals, and no direct link between the source (S) and the destination (D) has been analyzed, as it is compliant with the accepted solutions for IMT-Advanced systems. The book includes performance analysis and performance comparison of OFDM based: amplify-and-forward (AF) relay systems with fixed gain (FG), amplify-and-forward (AF) relay systems with variable gain (VG), decode-and-forward (DF) relay systems,each including two SCP schemes, known to maximize the system capacity and/or improve the bit error rate (BER) performances. Performance comparisons have enabled definition of optimal solutions for the future wireless communication systems in a given conditions, and for the given optimality criteria. OFDM based relay systems for future wireless communications contains recent research results in this area and is ideal for the academic staff and master/research students in area of mobile communication systems, as well as for the personnel in communication industry.

Future broadband wireless communication systems are expected to be able to offer new and powerful services enabling fast transmission rates of several tens of Mbit/s. This is an ambitious challenge especially for mobile communication systems since these systems should be able to cope with severely time dispersive channels, associated to the signal multipath propagation. Moreover, these systems should have high spectral and power efficiencies, as well as high capacity and flexibility. Spread spectrum techniques, particularly coded division multiple access (CDMA) techniques allow high capacity and flexibility, continuous transmission requiring low-peak power requirements for the amplifiers, as well as some robustness against fading and time-dispersion effects associated with the multipath propagation. When employed in prefix assisted (PA) block transmission schemes combined with frequency-domain receiver implementations they become especially interesting for broadband wireless systems. In Frequency-Domain Multiuser Detection for CDMA Systems the use of PA block transmission is considered in the context of both DS (Direct Sequence) and MC (Multicarrier) CDMA schemes. The main goal is the study of frequency-domain multiuser detection techniques with iterative signal detection/decoding techniques, also in combination with estimation and cancelation of nonlinear distortion effects. The receiver structures are suitable to scenarios with high interference levels and strongly time-dispersive channels.

The potential appkications of the integration of navigation, sensing and services are vast. This book examines the fundamentals of this new approach to integrated communication, navigation, sensing and services (Conasense).

For the vision of Europe 2020 as a smart, sustainable and inclusive economy to become reality, the EU have set forth the 20:20:20 targets by which greenhouse gas emissions and energy reduction of primary use should be reduced by 20% while 20% of energy consumption should come from renewable resources.

The Internet of Things is the emerging technology which interconnects smart objects using wireless communications. After having been extensively studied in academic labs, the Internet of Things is now widely applied in the industrial world (domestic automation, smart metering, smart cities).

Explores the idiosyncrasies of how to plan various types of wireless networks. Packed with details of the technologies that support each network type, this cutting-edge reference leads the reader step by step on how to plan and optimize various types of wireless networks.

Reviews some specific topics in the field of future internet and technologies that are closely related to the issue of finding effective solutions for the management of resources and performance. Technical topics discussed include future internet technologies; internet of things; multimedia networks; wireless access networks; positioning and localization in communications; and resource management.

Provides an overview of the next generation Internet of Things (IoT), ranging from research, innovation, development priorities, to enabling technologies in a global context. It is intended as a standalone in a series covering the activities of the Internet of Things European Research Cluster.

Wireless Power Transfer is the second edition of a well received first book, which published in 2012. It represents the state-of-the-art at the time of writing, and addresses a unique subject of great international interest in terms of research. Most of the chapters are contributed by the main author, though as in the first edition several chapters are contributed by other authors. The authors of the various chapters are experts in their own right on the specific topics within wireless energy transfer. Compared to the first edition, this new edition is more comprehensive in terms of the concepts discussed, and the range of current industrial applications which are presented, such as those of magnetic induction. From the eleven chapters of the first edtion, this second edition has expanded to twenty chapters. More chapters on the theoretical foundations and applications have been included. This new edition also contains chapters which deal with techniques for reducing power losses in wireless power transfer systems. In this regard, specific chapters discuss impedance matching methods, frequency splitting and how to deploy systems based on frequency splitting. A new chapter on multi-dimensional wireless power transfer has also been added. The design of wireless power transfer systems based on bandpass filtering approach has been included, in addition to the two techniques using couple mode theory and electronic circuits. The book has retained chapters on how to increase efficiency of power conversion and induction, and also how to control the power systems. Furthermore, detailed techniques for power relay, including applications, which were also discussed in the first edition, have been updated and kept. The book is written in a progressive manner, with a knowledge of the first chapters making it easier to understand the later chapters. Most of the underlying theories covered in the book are clearly relevant to inductive near field communications, robotic control, robotic propulsion techniques, induction heating and cooking and a range of mechatronic systems.